|
|
SEC-MALLS study on hyaluronan-albumin interactions
Sereda, Alena ; Kalina, Michal (referee) ; Chytil, Martin (advisor)
This work is focused on interactions of hyaluronan (HA) and bovine serum albumin (BSA). These interactions were studied by SEC-MALLS method, where molar mass, root mean square (rms) radii, hydronamic radius and intrinsic viscosity of particles of the system were defined. Additionally, interactions were examined by measurement of DLS and zeta potential, where hydrodynamic radius and a value of the zeta potential were defined. The interactions were confirmed at any of the used media, but with different efficiency. Furthermore it was found out, that the high ionic strength minimizes the range of the interactions, magnifies the radii of the complexes, their intrinsic viscosity and zeta potential. It was proved that complexes become smaller in their radii and viscosity with growing BSA concentraton.
|
|
|
Investigation of intercalation of alkaline metals in electrochromic devices
Kortyš, Petr ; Špičák, Petr (referee) ; Svoboda, Vít (advisor)
This work deals with investigation of intercalation of alkaline metals in electrochromic devices by the help of the quartz crystal microbalance method. The general aim is to investigate the influence of molar mass and resistance on properties of vanadium pentoxide and tungsten trioxide electrochromic films. The main measuring method used for investigating of interacalation of sodium and lithium ions into these films is the cyclic voltammetry. Drawn graphs reveals that sodium and lithium ions shows different qualities during intercalation, particularly in participation of solvent, therefore, in the influence of molar mass and in structural changes in the films.
|
|
|
Atelocollagen processing, gelation and characterization
Zubal, Lukáš ; Podzimek,, Štěpán (referee) ; Migliaresi, Claudio (referee) ; Vojtová, Lucy (advisor)
Předkládaná disertační práce se zabývá charakterizací, zpracováním a gelací rozpustného kolagenu. Literární rešerše shrnuje postavení kolagenu na trhu s transplantáty, jeho aplikace a jednotlivé typy kolagenu. Detailně jsou rozebrány jednotlivé metody charakterizace rozpustného kolagenu a způsoby jeho gelace. Experimentální část je rozdělena na dvě podkapitoly. První podkapitola experimentální části se zabývá rozpouštěním a gelací rozpustného kolagenu v natlakované CO2 atmosféře. Proti jiným podobným metodám, metoda pracuje na poměrně nízkém tlaku (do 0.9MPa) a je bezpečná z pohledu denaturace kolagenu neboť funguje za nízké teploty blízké 0°C. Tímto způsobem mohou být průhledné gely, obsahující velmi tenká vlákna kolagenu, vytvořeny mnohem rychleji než za použití konvenčních metod. Rychlost gelace a transparentnost dává konceptu potenciál v oblasti oftalmologie a měla by přinést podstatné výhody pro injektovatelné produkty, vytváření mikro kuliček a 3D tisk. Druhá část popisuje unikátní charakterizaci rozpustného kolagenu v nativním stavu pomocí metody průtokové frakcionace s víceúhlovým rozptylem světla (AF4-MALS). Získaná molekulová hmotnost (při nejvyšší detekované koncentraci) odpovídá předpovězené hmotnosti a nativní i denaturovaný kolagen lze snadno rozeznat v konformačním grafu. Tato nová metoda poskytuje konzistentní a stabilní výsledky ve srovnání s ostatními zavedenými metodami. Metoda může být použita pro optimalizaci kvality výtěžků během výroby rozpustného kolagenu, nebo pro citlivou detekci denaturace během zpracování kolagenu.
|
|
|
Study of hyaluronan-albumin systems using light scattering methods and calorimetry
Sereda, Alena ; Hermannová, Martina (referee) ; Chytil, Martin (advisor)
This thesis, which is a continuation of the previous Bachelor thesis, is dedicated to the study of polyelectrolyte complexes between hyaluronan (HA) and bovine serum albumin (BSA). Interactions between HA and BSA and a formation of complexes were studied by SEC-MALLS method, where a molar mass, a root mean square (rms) radius, a hydronamic radius and an intrinsic viscosity of particles of the system were defined. Furthermore the interactions were studied by calorimetric measurement ITC, where thermodynamic character of complex formation was determined. Additionally, dynamic and electrophoretic light scattering methods (DLS and ELS) were applied, where hydrodynamic radius and a value of the zeta potential were defined. Also the effect of higher temperature on the character and complex formation was examined by SEC-MALLS and ITC measurements. The interactions were confirmed at any of the used media, but with different efficiency. It was also proved that complexes become smaller in their radii and viscosity with growing BSA concentration. Furthermore it was proved, that the high ionic strength hinders surface charges of HA and BSA molecules and minimizes their mutual interactions. At the higher ionic strength the radii of the complexes, their intrinsic viscosity and zeta potential are increased. The higher temperature has only minimal effect on the formation of the complexes.
|
|
|
Influence of formulation factors on the characteristics of terbinafine loaded nanoparticles.
Barák, Vlastimil ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...
|
|
|
Terbinafine-loaded biodegradable polymeric systems for topical administration
Pokorná, Tereza ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Tereza Pokorná Title of Diploma thesis Terbinafine-loaded biodegradable polymeric systems for topical administration Supervisor: PharmDr. Eva Šnejdrová, Ph.D. In the diploma thesis the released properties of solid dispersions with terbinafine, based on polyesters of D,L-lactic acid and glycol acid, branched with pentaerythritol and tripentaerythritol are studied. The theoretical part deals with solid dispersions, their classification and methods of preparation, methods of drug dissolution testing, properties, effect, use of terbinafine and preparations containing terbinafine. In the experimental part, solid dispersions were prepared by the melting method. The drug was incorporated into the polyester in the form of a hydrochloride or a base in a concentration of 10 % or 20 %. Some systems were plasticized with 30% triethyl citrate. Thin layers were formulated from solid dispersions, and drug dissolution tests were performed on phosphate buffer pH 7.4 at 37 řC. Assay of terbinafine released was performed spectrophotometrically at 223 nm and ultra-high performance liquid chromatography. Based on the results of this diploma thesis, it can be clearly stated that the suitable carrier of terbinafine...
|
|
|
Influence of formulation factors on the characteristics of terbinafine loaded nanoparticles.
Barák, Vlastimil ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...
|
|
|
Influence of formulation factors on the characteristics of terbinafine loaded nanoparticles.
Barák, Vlastimil ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...
|
|
|
Influence of formulation factors on the characteristics of terbinafine loaded nanoparticles.
Barák, Vlastimil ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...
|
|
|
Terbinafine-loaded biodegradable polymeric systems for topical administration
Pokorná, Tereza ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Tereza Pokorná Title of Diploma thesis Terbinafine-loaded biodegradable polymeric systems for topical administration Supervisor: PharmDr. Eva Šnejdrová, Ph.D. In the diploma thesis the released properties of solid dispersions with terbinafine, based on polyesters of D,L-lactic acid and glycol acid, branched with pentaerythritol and tripentaerythritol are studied. The theoretical part deals with solid dispersions, their classification and methods of preparation, methods of drug dissolution testing, properties, effect, use of terbinafine and preparations containing terbinafine. In the experimental part, solid dispersions were prepared by the melting method. The drug was incorporated into the polyester in the form of a hydrochloride or a base in a concentration of 10 % or 20 %. Some systems were plasticized with 30% triethyl citrate. Thin layers were formulated from solid dispersions, and drug dissolution tests were performed on phosphate buffer pH 7.4 at 37 řC. Assay of terbinafine released was performed spectrophotometrically at 223 nm and ultra-high performance liquid chromatography. Based on the results of this diploma thesis, it can be clearly stated that the suitable carrier of terbinafine...
|
guest ::
